Teledyne-lecroy SAS_SATA Protocol Suite Verification Script Engine Manual do Utilizador Página 89
- Página / 97
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
89
Appendix B – ATA Commands
See the include file “VS_ATA_Commands.inc“ in the ..\SASVFScripts or ..\SATAVFScripts subfolder of the
main SAS Protocol Suite or SATA Protocol Suite folder for defined constants for use in scripts.
Note: This file needs to be included in the VSE Script to be able to use the defined constants.
Note: The SCSI commands listed below are defined with the following prefix ATA_CMD_ (e.g.
CFA_ERASE_SECTORS would be ATA_CMD_ CFA_ERASE_SECTORS)
CFA_ERASE_SECTORS = 0xC0
CFA_REQUEST_EXTENDED_ERROR_CODE = 0x03
CFA_TRANSLATE_SECTOR = 0x87
CFA_WRITE_MULTIPLE_WITHOUT_ERASE = 0xcd
CFA_WRITE_SECTORS_WITHOUT_ERASE = 0x38
CHECK_MEDIA_CARD_TYPE = 0xD1
CHECK_POWER_MODE = 0xE5
DEVICE_CONFIGURATION = 0xB1
DEVICE_RESET = 0x08
DOWNLOAD_MICROCODE = 0x92
EXECUTE_DEVICE_DIAGNOSTIC = 0x90
FLUSH_CACHE = 0xE7
FLUSH_CACHE_EXT = 0xEA
GET_MEDIA_STATUS = 0xDA
IDENTIFY_DEVICE = 0xEC
IDENTIFY_PACKET_DEVICE = 0xA1
IDLE = 0xE3
IDLE_IMMEDIATE = 0xE1
MEDIA_EJECT = 0xED
MEDIA_LOCK = 0xDE
MEDIA_UNLOCK = 0xDF
NOP = 0x00
PACKET = 0xA0
READ_BUFFER = 0xE4
READ_DMA = 0xC8
READ_DMA_EXT = 0x25
READ_DMA_QUEUED = 0xC7
READ_DMA_QUEUED_EXT = 0x26
READ_LOG_EXT = 0x2F
READ_MULTIPLE = 0xC4
READ_MULTIPLE_EXT = 0x29
READ_NATIVE_MAX_ADDRESS = 0xF8
READ_NATIVE_MAX_ADDRESS_EXT = 0x27
READ_SECTORS = 0x20
READ_SECTORS_WITHOUT_RETRY = 0x21
READ_SECTORS_EXT = 0x24
READ_VERIFY_SECTORS = 0x40
READ_VERIFY_SECTORS_WITHOUT_RETRY = 0x41
READ_VERIFY_SECTORS_EXT = 0x42
SECURITY_DISABLE_PASSWORD = 0xF6
SECURITY_ERASE_PREPARE = 0xF3
SECURITY_ERASE_UNIT = 0xF4
SECURITY_FREEZE_LOCK = 0xF5
SECURITY_SET_PASSWORD = 0xF1
SECURITY_UNLOCK = 0xF2
SEEK = 0x70
- SAS/SATA Protocol Suite 1
- Verification Script Engine 1
- Reference Manual 1
- Document Disclaimer 2
- Trademarks and Servicemarks 2
- Copyright 2
- Table of Contents 3
- Chapter 1: Introduction 6
- SASSuite/SATASuite 11
- 4.2 VSE GUI Settings 15
- Members 16
- Context Members 30
- 7.1 Frame Level Events 31
- Chapter 8: Declarations 32
- 8.2 Map Declaration 33
- 9.1 SendLevel() 35
- 9.2 SendLevelOnly() 36
- 9.3 DontSendLevel() 36
- 9.4 SendChannel() 37
- 9.5 SendChannelOnly() 37
- 9.6 DontSendChannel() 38
- 9.7 SendAllChannels() 38
- 9.8 SendTraceEvent() 38
- 9.9 DontSendTraceEvent() 39
- 9.10 SendTraceEventOnly() 39
- 9.11 SendAllTraceEvents() 39
- 9.12 SendProtocolError() 40
- 9.13 SendProtocolErrorOnly() 40
- 9.14 DontSendProtocolError() 41
- 9.15 SendPairSASAddress() 41
- 9.18 SendAllPairSASAddress() 42
- 9.19 SendPrimitive() 43
- 9.20 SendSSPTransport() 44
- 9.21 SendSTPTransport() 45
- 9.22 SendSMPTransport() 46
- 9.23 SendSCSICommand() 47
- 9.24 SendATACommand() 48
- 9.25 SendSMPCommand() 49
- 9.26 SendTaskMgmCommand() 50
- 10.1 Time() 51
- Chapter 11: Timer Functions 52
- 11.2 GetTimerTime() 53
- 11.3 KillTimer() 53
- 12.1 AddTime() 54
- 12.2 SubtractTime() 54
- 12.3 MulTimeByInt() 55
- 12.4 DivTimeByInt() 55
- 13.1 IsEqualTime() 56
- 13.2 IsLessTime() 56
- 13.3 IsGreaterTime() 57
- 13.4 IsTimeInInterval() 57
- 14.1 TimeToText() 58
- 15.1 EnableOutput() 59
- 15.2 DisableOutput() 59
- 15.3 ReportText() 60
- 16.1 GetTraceName() 61
- 16.2 GetScriptName() 61
- 16.3 GetApplicationFolder() 61
- 16.4 GetCurrentTime() 62
- 16.5 GetEventSegNumber() 62
- 17.1 GotoEvent() 64
- 17.2 SetMarker() 65
- Chapter 18: File Functions 66
- 18.2 WriteString() 67
- 18.3 CloseFile() 67
- 18.4 WriteBin () 68
- 18.5 ReadBin () 69
- 18.6 SeekToBegin () 71
- 18.7 SeekToEnd() 71
- 18.8 ShowInBrowser() 72
- Functions 73
- 20.1 MsgBox() 74
- 20.2 InputBox() 76
- 20.3 GetUserDlgLimit() 78
- 20.4 SetUserDlgLimit() 78
- 22.1 ScriptForDisplayOnly() 82
- 22.2 Sleep() 82
- 22.3 ConvertToHTML() 82
- 22.4 Pause() 83
- 22.5 GetPacketData() 84
- 23.1 Example Script Files 85
- Appendix A – Primitive Codes 87
- Appendix B – ATA Commands 89
- Appendix C – SCSI Commands 91
- Appendix D – SMP Commands 95
Manuais e produtos relacionados com Equipamento Teledyne-lecroy SAS_SATA Protocol Suite Verification Script Engine
Equipamento Teledyne-lecroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual Manual do Utilizador
(302 páginas)
(302 páginas)
Equipamento Teledyne-lecroy Sierra M6-4 SAS_SATA Protocol Analyzer Quick Start Manual do Utilizador
(4 páginas)
(4 páginas)
Equipamento Teledyne-lecroy Sierra Port Configurations Reference Manual Manual do Utilizador
(76 páginas)
(76 páginas)
Equipamento Teledyne-lecroy STX M6-1 SAS_SATA Protocol Analyzer Quick Start Ma Manual do Utilizador
(4 páginas)
(4 páginas)
Equipamento Teledyne-lecroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual Manual do Utilizador
(496 páginas)
(496 páginas)
Equipamento Teledyne-lecroy User-Defined Decoding (UDD) Advanced Script Langua Manual do Utilizador
(28 páginas)
(28 páginas)
Equipamento Teledyne-lecroy SAS_SATA Tracer_Trainer Automation API Manual Manual do Utilizador
(94 páginas)
(94 páginas)
Equipamento Teledyne-lecroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual Manual do Utilizador
(498 páginas)
(498 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais